Quick answer
“Grip” in badminton has two meanings. It can mean how you hold the racket, such as the forehand or backhand grip. It can also mean the handle itself: its size (the G number) and the wrap on it. If you are unsure about size, choose the thinner grip, because you can build it up with an overgrip. Replace a grip when it becomes slick, torn or compressed.
How you hold the racket
Most players use a small set of hand grips:
- Forehand grip. The default for most shots, including clears, smashes, drops and net shots. Hold the handle as if you are shaking hands with it, with the fingers loosely wrapped and a V-shape between the thumb and index finger.
- Backhand grip. Place the thumb flat on the wider backhand bevel. It is used for backhand serves, backhand drives and defence in doubles.
- Bevel grip. A halfway position between forehand and backhand. It is often used for net shots, and for backhand shots in the rear court.
- Panhandle grip. Pinch the wide sides of the handle between the thumb and fingers. It is often used for a late backhand and quick defensive or net play, and it is less suited to deep clears.
Keep the grip light. A tight grip tires the forearm and limits wrist movement. Many players also think of the “three-finger” idea: the thumb, index and middle fingers guide the racket, while the ring and little fingers tighten at the point of impact. You can practise the hand positions without a racket before you try them on court.
Grip sizes: G numbers
Yonex and many other brands show grip size as a G number, where a higher number means a thinner handle. G4 is the most common size in Europe and North America, and G5 is common in Asia. G3 and G2 are thicker still, for players who prefer a bigger grip.
Sizes are not standard across brands. A G5 from one brand may feel different from a G5 from another, and the millimetre or inch figures quoted for each size are approximate.
A grip that is too thick limits finger control and makes grip changes harder. A grip that is too thin can lead to squeezing, which tires the forearm and wrist. If you are unsure, choose the thinner grip and build it up with an overgrip. A grip that is too thick is much harder to reduce.
Overgrips
An overgrip is a thin, tacky layer, typically about 0.6–0.75 mm thick, wrapped over the existing grip. It improves sweat absorption and feel, and it is changed more often than the base grip. Yonex Super Grap (AC102) is a popular overgrip.
Each layer adds thickness and moves the balance slightly towards the handle. Stacking several overgrips changes the weight and balance, so check how the racket feels after each change. The head-heavy and head-light guide explains how balance shifts.
Replacement grips
A replacement grip is a thicker base grip, usually about 1.5–2 mm, that replaces the factory grip completely. It is cushioned and made from synthetic or leather material. Replacement grips suit players who want more cushioning or a different feel, and they are less often changed than overgrips.
Towel grips
A towel grip is made from absorbent cotton. It is thicker and heavier than an overgrip, and it suits players with very sweaty hands in humid conditions. It needs replacing more often, and it can hold moisture, so keep it clean and dry.
How to wrap an overgrip
- Start at the butt of the handle, and wrap upwards along the handle.
- Overlap each turn by about a third to a half of the tape’s width.
- Finish with the tape provided, and trim the end neatly.
- Check the direction of the wrap. It should run in the direction that stops the overlap peeling during play, and this direction differs for right- and left-handed players.
Wrapping neatly prevents the grip from bunching or peeling during a match.
When to replace a grip
Replace an overgrip when it becomes slick, torn or compressed. Frequent players often change overgrips every two to four weeks, though this varies with how much they play and how much they sweat. A worn grip also changes the feel of the racket, so check it regularly.
Common misconceptions
- “A thicker grip gives more power.” Badminton relies on finger and wrist action, which a thick grip restricts.
- “A G5 is a G5 across brands.” Sizes differ between brands.
- “Stacking overgrips doesn’t change anything.” Each layer changes the thickness, weight and balance.
- “Tennis grip sizes apply to badminton.” Badminton handles are much thinner than tennis handles.
Safety
A worn or slippery grip raises the risk of the racket slipping out of your hand during play. Replace a grip that has worn smooth or started to tear before it causes a problem.
Frequently asked questions
What is the best type of badminton grip?
There is no single best hand grip. The forehand grip is the default for most shots, and players switch to the backhand, bevel or panhandle grip for specific shots. Learning to change grips smoothly matters more than mastering one.
What is a replacement grip in badminton?
A replacement grip is a thicker base grip that replaces the factory grip completely. It gives more cushioning than an overgrip, and it is changed less often. If you only want a thinner or tackier feel, an overgrip is usually enough. For more on the racket itself, see the beginners’ guide, and for dimensions and grip circumference, the dimensions guide.